Windows 95 Dialup Networking
Setup
You
now need to set the maximum 'DTE' speed that you modem can support. Most likely
this will already be set if Windows guessed your modem correctly. If not,
than it is a good idea to set it one level above what speed you will be connecting
at. (i.e. if you have a 28.8, then select the next highest number, which in
this case would be 38400)
Click on the 'Connection'
tab at the top and make sure that it says the following: Data Bits: 8 , Parity:
None , Stop Bits: 1 (as shown next)
Previous
- Next
|
For technical support issues please refer to this webpage (or)
call our offices for telephone assistance:
Louisville:
502-589-4638
Lexington:
606-225-1655
Radcliff:
502-352-0444
|
